Description
Hale HPX300-B18 Skid Mount Firefighting Pump
545-4071-96-0
The Hale HPX300-B18 Skid Mount Firefighting Pump is a medium pressure, medium volume fire pump.
Flows:
350 GPM @ 40 PSI
225 GPM @ 75 PSI
120 GPM @ 100 PSI
The pump body and head are coupled together with a stainless steel bank clamp which allows for quick pump removal for servicing.
X Base Features:
- Maxstream pump without base fuel tank - configured for easy installation by truck builders
- Exhaust primer
- Electric Start with manual recoil backup
- Mounted to a steel skid base plate that can easily be mounted into any vehicle
- Rail base includes all required hardware and vibration isolators
- Control Panel (ships loose) with mounted single discharge gauge and engine controls is included as standard
- 6' wiring harness
Control Panel:
- Discharge gauge
- Priming lever
- Start button
- ON/OFF switch
- Oil warning light
- Choke
- Throttle control
Features:
- Flows ranging from 120 GPM @ 100 PSI to 350 GPM @ 40 PSI
- Ultra-reliable Briggs & Stratton 18-HP 4-cycle V-Twin gasoline engine
- Electric start with recoil backup
- Anodized aluminum alloy pump head and body
- Pump head and body coupled together with stainless steel band clamp for easy serviceability
- Bronze impeller and renewable wear rings
- Self-adjusting mechanical seal
- Exhaust gas venturi priming
- 3.0" NPT / 4.0" Victaulic suction connection; 3.0" NPT discharge
Specifications:
Length: | 21 inches | |
Width: | 18 inches | |
Height: | 20 inches | |
Weight: | 163 lbs (74 kg) | |
Suction Connection: | 3.0" Female NPT / 4.0" Victaulic | |
Discharge Connection: | 3.0" Female NPT | |
Body and Head: | Lightweight, high strength, anodized aluminum | |
Pump Shaft: | Engine shaft with bronze sleeve | |
Impeller: | Enclosed type, silicon bronze | |
Clearance Rings: | Renewable type, bearing bronze | |
Gear Box: | Direct drive | |
Priming: | Exhaust venturi | |
Type: | Low Pressure, High Volume | |
Max Pressure (PSI): | 120 PSI | |
Max Flow (GPM): | 375 GPM |
Details
SKU: |
HALE-HPX300-B18 |