Hale Pumps
Hale HPX200-B18 Skid Mount Firefighting Pump
Hale HPX200-B18 Skid Mount Firefighting Pump
545-4061-30-0
The Hale HPX200-B18 Skid Mount Firefighting Pump is a medium pressure, medium volume truck mount pump.
Flows ranging from:
70 GPM @ 150 PSI to 240 GPM @ 25 PSI
Features:
Ultra-reliable Briggs & Stratton 18-HP 4-cycle V-Twin gasoline engine
Electric start with recoil backup
Anodized aluminum alloy pump head and body
Pump head and body coupled together with stainless steel band clamp for easy serviceability
Bronze impeller and renewable wear rings
Self-adjusting mechanical seal
Exhaust gas venturi priming
3.0" NPT / 4.0" grooved coupling suction connection; 2.5" NPT discharge
Control Panel:
Discharge gauge
Priming lever
Start button
ON/OFF switch
Oil warning light
Choke
Throttle control
X Base Features:
Maxstream pump without base fuel tank - configured for easy installation by truck builders
Exhaust primer
Electric Start with manual recoil backup
Mounted to a steel skid base plate that can easily be mounted into any vehicle
Rail base includes all required hardware and vibration isolators
6' wiring harness
Applications/Solutions:
Fire OEMs
Firefighting - Wildland Forestry
Specifications:
Warranty 3 year Warranty
Weight 145 lbs (66 kg)
Length 20.25 inches (514 mm)
Width 18 inches (457 mm)
Height 20 inches (508 mm)
Fuel Type Petrol/Gasoline
Specifications:
Length (inches): | |
20.25" |
Width (inches): | 18" | |
Height (inches): | 20" | |
Weight (pounds): | 145 lbs (66 kg) | |
Suction Connection: | 3" Female NPT; 4" Victaulic | |
Discharge Connection: | 2.5" Female NPT | |
Body and Head: | Lightweight, high strength, anodized aluminum | |
Pump Shaft: | Engine shaft with bronze sleeve | |
Impeller: | Enclosed type, silicon bronze | |
Clearance Rings: | Renewable type, bearing bronze | |
Gear Box: | Direct drive | |
Priming: | Exhaust venturi | |
Type: | Medium Pressure, Medium Volume | |
Max Pressure (PSI): | 175 PSI | |
Max Flow (GPM): | 245 GPM | |
NFPA 1906 Rated Capacity: | 50 GPM @ 150 PSI |