Description
SPG Golf Ball Plug
Syntho-Plug is a 1.5" half round, polyurethane impregnated, water-activated foam plug used to temporarily repair hull damage ensuring a safe trip home or to mitigate spill containment.
It is initially pliable to insert into void and quickly hardens to fill the void, reducing water intake, or output, from 280 GPM to less than 1 GPM.
Works with fiberglass, steel, wood or aluminum, in fresh, brackish, or saltwater, and can be applied above or below the water line.
Reminder; Rotate package every 30 days to prevent resin from settling in one end or side. Also massage foil pouch/bag before using to distribute resin throught plug.
Typical Applications:
Benefits:
Kit Contents:
Physical Properties:
Syntho-Plug is a 1.5" half round, polyurethane impregnated, water-activated foam plug used to temporarily repair hull damage ensuring a safe trip home or to mitigate spill containment.
It is initially pliable to insert into void and quickly hardens to fill the void, reducing water intake, or output, from 280 GPM to less than 1 GPM.
Works with fiberglass, steel, wood or aluminum, in fresh, brackish, or saltwater, and can be applied above or below the water line.
Reminder; Rotate package every 30 days to prevent resin from settling in one end or side. Also massage foil pouch/bag before using to distribute resin throught plug.
Typical Applications:
- Thru hull damage
- Spill containment
Benefits:
- Ready to use
- Simple application
- Effective, time saving
- No mixing, no mess
- Sets rock hard in minutes
Kit Contents:
- Step-by-Step Instructions
- Protective gloves
- Syntho-Plug
Physical Properties:
Color: | | Foam - Yellow, Urethane - White |
Cure Time: | | 5 minute at 75 degrees F (24 degrees C) |
Resin Type: | | Pre-impregnated |
Application Temperature: | | 32 to 160 degrees F (0 to 71 degrees C) |
Shelf Life: | | 12 months with recommended storage conditions |
1. Put on supplied gloves. Remove Syntho-Plug from foil pouch and submerge into water for 5 seconds.
2.Twist and force Syntho-Plug into hole.
3.Using gloved hand, firmly press Syntho-Plug flat against the surface of the vessel/container, creating a mushroom effect.
4.While holding one hand with constant pressure against damaged area, use other hand to smooth the outer edges of Syntho-Plug onto the surface of the vessel/container. Note: Syntho-Plug will feel warm to the touch while it cures/hardens. This is expected and is not harmful.
Details
SKU: |
EC-SPG |