Description
SCBA Manifold
The SCBA Manifold comes with a 6000 PSI valve for each cylinder.
All of the below manifolds include the following:
NOTE: A HPR-1 or HPR-2 regulator assembly is highly recommended for use with the high pressure manifolds listed above.
The SCBA Manifold comes with a 6000 PSI valve for each cylinder.
All of the below manifolds include the following:
- 6000 PSI valve for each cylinder bank with #4 JIC male (37o flare) hose connection
- shut-off valve and dust cap with the appropriate connection (CGA-347 for 4500 psi systems and quick disconnect for 6000 psi systems) for the pressure being used on the system refill
- 0.25" FNPT on the outlet
NOTE: A HPR-1 or HPR-2 regulator assembly is highly recommended for use with the high pressure manifolds listed above.
Details
SKU: |
SCBAS-HPM |
