Description
Plug N Dike EFWP-22 Leak and Spill Control Kit
The Plug N Dike EFWP-22 Leak and Spill Control Kit can be used to help plug and control leaks ranging from crumpled areas with irregular punctures to jagged slits.
Uses:
- Leaking fuel tanks
- Transformers, including broken connectors
- Broken hydraulic and fuel lines
- Damaged or broken valve on a tanker
- Damaged drums
- Military vehicles
Kit Includes:
- (1) 1 lb. jar of low temp premix
(3) 12 in. Polyurethane foam pieces
(1) Small plug cone
(1) Medium plug cone
(1) Large plug cone
(1) Small plug wedge
(1) Medium plug wedge
(1) Large plug wedge
(1) Rubber mallet
(2) 11 in. Zip ties
(2) 24 in. Zip ties
(1) Pair of disposable gloves
(1) Plastic container with lid
The expandable foam is polyurethane and is compatible with vehicle, truck, and aircraft fuels, many solvents and bases. Note: some leaks may be impossible to plug 100%. This kit offers several ways to still minimize and control the leak. It is not recommended for use with concentrated acids or oxidizers.
It has a temperature range of -40 to +185 degrees F. It can be used in very cold weather.
Smaller wedges are supplied because they are easier to use together to help plug irregular holes rather than trying to work with larger wedges.
Details
SKU: |
PD-EFWP-22 |
