Description
Kussmaul Single Bar Graph Display
Indicator Installation:
CAUTION: Do not over tighten because you will bend the plastic bezel and break the watertight seal 091-199-001
Indicator Installation:
- Locate Indicator in a convenient place on the vehicle.
- Place the template in position and center punch in 4 places
- Drill holes as shown
- Cut out square hole
- Connect wiring to charger in accordance with the instructions in the charger installation instructions
- Install as shown
- Insert (4) #8-32 screws supplied and tighten
CAUTION: Do not over tighten because you will bend the plastic bezel and break the watertight seal 091-199-001
Details
SKU: |
KM-091-199-001 |