Description
ATI Forest Lite Type II Wildland Fire Hose
The ATI Forest Lite Type II is a single jacket, polyurethane lined lightweight hose intended for use in wildland fire suppression.
Lining - The Thermoplastic extruded PU interior lining is a single-ply extruded tube and is unaffected by ozone. The finished form is free of pits or other imperfections and has a smooth finish. No reclaimed material used.
Adhesion - The adhesion between the liner and the inside jacket is such that the rate of separation of a 1.5" wide strip cut transversely, is not greater than 1" per minute over a period of ten minutes.
Couplings – Expansion-type hardcoat anodized aluminum meeting U.S. Forestry specifications are standard. NST, NPSH, or Quarter-Turn couplings are available.
Warranty - ATI warranties both the hose and couplings to be free from defects in material and workmanship for a period of 1 year. Upon evaluation, apart from mistreatment that would make it unfit for service, hose found to be defective will be repaired or replaced by ATI at no charge to the fire department.
Specifications:
Size | Service Test | Proof Test | Burst Test | Weight (lbs.) |
1" | 300 psi | 600 psi | 900 psi | 4 |
1-1/2" | 300 psi | 600 psi | 900 psi | 7 |
Features:
- Meets or exceeds NFPA 1961 Fire Hose Standard, 2013 edition as well as U.S. Forest Service F-187 standard.
- Colors: Yellow
- Available in the sizes of 1" and 1-1/2"
- The jacket is a combination of 100 percent virgin synthetic high tenacity yarn and spun yarn
- Thin walled polyurethane lining is a single-ply extruded tube
- Unaffected by ozone.
- 1 Year Warranty
- Additional thread types available upon request*
Details
SKU: |
ATI-TYPE-II |
Product Reviews
-
right out of the...
the hose arrived just in time cane right out of the box into the woods for a brush fire work great.