Description
ATI Armtex HP Structural Firefighting Hose
The ATI Armtex HP Structural Firefighting Hose Composed of an outer jacket woven from percent high tenacity synthetic yarn and an inner liner consisting of a one-piece extruded through the weave nylon reinforced NBR rubber tube.
Burn-Through Resistance - Boasts outstanding burn-through resistance, being capable of withstanding a surface temperature in excess of 1100 degrees F for a minimum of one minute, at a static pressure of 100 psi, without damage or rupture to the synthetic reinforcement.
Burst Resistance - Will not burst catastrophically even with a puncture through both the outer jacket and liner.
Features:
- Resists burn-through for a full minute
- Perfect fit of outer jacket and inner tube
- High tenacity polyester/polyamide outer jacket
- Oversized inner jacket for increased water flow
- Lower friction loss than other double jacket hoses
- Exceptional heat and cut resistance
- Cold resistant to -40 degrees F
- Outstanding kink resistance
- Ideal for low pressure combination straight stream/fog nozzles
- Available as 1-3/4" attack line and 2-1/2" master flow line.
- NFPA 1961 compliant
- 10 year warranty
- Additional thread types available upon request*
- Call for 1-3/4" Liberator Couplings*
Specifications:
| Diameter(in) | Color(s) | Working Pressure(psi) | Test Pressure(psi) | Burst Pressure(psi) | Standard Length(ft) | Weight(lb/ft) | Thickness(in) |
| 1-3/4" | Fluorescent Yellow, Blue Devil Blue | 580 | 1160 | 1740 | 50/100 | 0.40 | 0.142 |
| 2-1/2" | Fluorescent Yellow, Blue Devil Blue | 410 | 820 | 1230 | 50/100 | 0.06 | 0.154 |
Details
SKU: |
ATI-ARMTEXHP |
