FRC Throttle XCEL Engine Throttle and Engine Displays

FRC Throttle XCEL Engine Throttle and Engine Displays 

The ELA200 models are programmed to operate in one of the following control modes dependent on requirements, engine type, and wiring.

• Throttle Control Mode: In this mode the ThrottleXcel is a traditional remote engine hand throttle and provides manual control of the engine RPM. 
• Governor Control Mode: In this mode the ThrottleXcel is an engine governor and maintains a constant engine RPM. It eliminates the need to make throttle adjustments as the engine load changes.

RPM adjustments are made in both modes by turning the control knob. The engine can be brought down to idle quickly after operation with the touch of the red idle button.

The four LED bar graphs provide constant display of safe operating ranges for engine oil pressure, engine coolant temperature, transmission temperature, and battery voltage. They do not show exact numbers or units of measure. Detailed information is shown in the message display when the MENU button is pressed. Engine hours are also shown.

All controls and indicators are located on the front of the control module.

Exclusively FRC:

• Quick response control knob allows faster and more reliable RPM adjustments
• Two line digital message display to clearly show the ROM settings during normal operations, as well as warning alarams and stored data program features
• Bi-color LED bar graphs that provide operators with clear visual engine status 
• An additional 4th bi-color LED bar grpah specific for transmission temperature
• A built-in day/night sensor adjusts the brightness of the LED display to ensure clear viewing 
• Separate buttins for MENU and SILENCE> SILENCE buttin to deactivate the audible waning alram
• MENU button to access stored data and program features

Dimensions:

• 6.75" (H) x 4.625" (W)
• 171.45 mm (H) x 117.48 mm (W)

Featuers:

• J1939 or CAN Bus for Engine Information
• Manual or Automatic Control of Engine RPM
• Powers Up at Engine Idle RPM
• Interlock Signal Recognition with Throttle Ready LED
• Return to Engine Idle With the Push of a Button
• Diagnostic Capabilities
• High Idle
• Displays and LEDs Automatically Adjust for Day or Night Operation
• Audible Alarm Buzzer (Optional)
• KPa / Bar (Optional)

The ThrottleXcel is available in various models. Each model is programmed to interface with specific engines. All models provide the same functions, controls, and digital readouts.